PAS Fluid is a premium, semi synthetic oil specially designed for use in Australian, European, US & Korean power steering and suspension systems. It contains a special Anti-Shudder (noise & chatter) additive.
PAS Fluid fully meets the requirements of Land Rover PAS 14315.
- Click here to view power steering & suspension flyer
PAS Fluid is recommended for use in the power steering and active cornering control system (ACE) of Land Rover vehicles such as the Discovery and Defender.
PAS Fluid also meets or exceeds the requirements for power steering units used by Chrysler and General Motors North America and for ZF power steering units. It may be used in power steering units where automatic transmission fluids are specified and use of a semi-synthetic fluid is desired.
PAS Fluid can be used where products such as Pentosin CHF 7.1 or 4548 are recommended and where Dexron VI is recommended in Holden Commodore / Calais / Caprice & HSV VE series vehicles.
PAS Fluid can also be used where 7.5W motorcycle fork oil is required.
Other applications include the power steering and suspension systems of -
| Aston Martin
|| Ford |
||and many others
Penrite also market Power Steering Fluid, LHM Plus, MB 15, and LDAS special power steering and suspension fluids. Please check your handbook or call Penrite to clarify any applications for these products.
- Semi synthetic performance
- Minimises shudder & noise
- Extends seal and hose life
- Good low temperature fluidity
- Protects against rust and corrosion
- Chrysler MS-5931
- Chrysler MS-9462
- Esso EZL 998 (Jaguar S)
- Ford M2C128-C
- Ford M2C128-D
- Ford M2C195-A (Power steering only)
- GM 9985835
- GM 9985819
- Land Rover STC 50717 (ACE)
- MB 236.3
- MB 341
- Opel 90 513486
- PAS 14315
- VW TL-VW-570-26
- ZF TE ML-09
- ZF TE ML-09B
|Density at 15°C, kg/L
|Viscosity, Kinematic, cSt
|Viscosity, Brookfield cP at -40°C
|Phosphorus, Mass %
For product safety and handling information, refer to Material Safety Data Sheet (MSDS SHEET) below
Information in this sheet is based on recent production. Minor variations to typical properties are expected in normal manufacture and do not affect product performance. An MSDS is available on request.