ENVIRO+ 5W-40 is a premium full synthetic, SAE 5W-40 Original Equipment Manufacturer (OEM), Fully Licensed and Warranty Approved engine oil. It is fully licensed and approved for warranty service for particular GM / Holden (dexos 2TM ), VW, Audi, Skoda, Seat, BMW, Mercedes Benz & Porsche vehicles. It uses the latest advances in mid SAPS (Sulphated Ash, Phosphorus and Sulphur)* additive technology.
Licensed by the API (American Petroleum Institute) to meet SN specifications ensuring quality and satisfaction. It also exceeds European ACEA C3 specifications
ENVIRO+ 5W-40 is designed for use in modern 4, 6 & 8+ cylinder multi-cam, multi-valve (including VVT), naturally aspirated, supercharged & turbocharged engines. It is suitable for use in direct injection petrol and light duty diesel engines including those fitted with/without DPFs (Diesel Particulate Filters).
ENVIRO+ 5W-40 exceeds API SN and ACEA C3 and may be used where SAE 0W-40, 5W-30 & 10W-30 oils are specified in the owners handbook. May also be used where the fuel economy specifications ACEA A1/B1, A5/B5 and ILSAC GF-5 are specified and in vehicles requiring ACEA A3/B4 made before the 2010 model year, and where ACEA C2 is specified.
ENVIRO+ 5W-40 is suitable for use in passenger cars, 4WDs & light commercial vehicles. It is not recommended for use in motorcycles. It can be used with Petrol, LPG, E10, diesel (With & Without DPFs) & other conventional fuels.
ENVIRO+ 5W-40 features the Penrite EXTRA TEN in the oil's SAE rating. The EXTRA TEN helps protect your engine by using an oil that has a higher viscosity at operating temperature than what is normally specified, thus providing better protection and reducing engine wear in all driving conditions.
NOTE: when changing oil, Penrite recommend using Penrite Engine Flush, a fast acting, solvent free, engine cleaning formulation that removes engine deposits, sludge and contaminants with the oil service drain. It contains added zinc for engine wear protection and its fast acting formulation works in 10 minutes.
For vehicles fitted with a Diesel Particulate filter we recommend the use of Penrite ENVIRO+DPF CLEANER to clean & prevent DPF blockages, maximise catalyst life and improve engine efficiency, power & fuel economy.
* Low SAPS oils may sometimes be referred to as "Low Ash" oils
For product safety and handling information, refer to Safety Data Sheet (SDS SHEET) below
|Density at 15°C, kg/L||0.850|
|Viscosity, Kinematic, cSt at 40°C||81|
|Viscosity, Kinematic, cSt at 100°C||13.4|
|Cold Cranking Viscosity, cP at -30°C||5620|
|Zinc, Mass %||0.089|
|Phosphorus, Mass %||0.080|
|Sulphated Ash, mass %||0.80|