Premium Mineral 5W-30 is a high quality premium mineral, SAE 5W-30, friction modified engine oil made from pure hydrocracked base oils and an advanced anti-wear additive system for complete engine protection.
Licensed by the API (American Petroleum Institute) to meet SN Resource Conserving and ILSAC GF-5 specifications ensuring quality and satisfaction.
Premium Mineral 5W-30 is designed for use in modern 4, 6 & 8+ cylinder multi-cam, multi-valve (including VVT), naturally aspirated, supercharged & turbocharged engines. It is also suitable for use in rotary engined vehicles such as Mazda RX series vehicles that require this viscosity grade.
Premium Mineral 5W-30 is designed for modern petrol and LPG vehicles that require SAE 5W-30 engine oils meeting the fuel economy ILSAC GF-5 standard. It meets the latest API SN specification providing increased wear protection, better resistance to sludge formation and lower piston deposits than previous and lower grade oils. It can also be used where previous API specifications SM (2004-10), SL (2001-04), SJ etc were recommended and where the earlier ILSAC GF-3 or GF-4 specifications were required.
Premium Mineral 5W-30 is designed for use in passenger car, 4WD’s and light commercial petrol driven vehicles. It is not recommended for use in four stroke motorcycles with wet clutches. It is suitable for use in modern petrol, LPG and Hybrid engined vehicles as well as being suitable for everyday road use in “Flex Fuel" systems where E10 and E85 Ethanol fuels are used. It is not suitable for use in diesel engined vehicles and is not recommended for use in four stroke motorcycles with wet clutches.
NOTE: when changing oil, Penrite recommend using Penrite Engine Flush, a fast acting, solvent free, engine cleaning formulation that removes engine deposits, sludge and contaminants with the oil service drain. It contains added zinc for engine wear protection and its fast acting formulation works in 10 minutes.
For product safety and handling information, refer to Safety Data Sheet (SDS SHEET) below
|Density at 15°C, kg/L||0.856|
|Viscosity, Kinematic, cSt at 40°C||67|
|Viscosity, Kinematic, cSt at 100°C||11.2|
|Cold Cranking Viscosity, cP at -30°C||5827|
|Zinc, Mass %||0.085|
|Sulphated Ash, mass %||0.87|