HPR DIESEL 15 is a premium high performance, semi synthetic SAE 15W-50, non-friction modified engine oil. It contains a DOUBLE LAYER of engine wear protection with FULL ZINC and Penrite's advanced EXTRA TEN technology. It contains a combination of high technology additives, including increased dispersant levels and low shear viscosity modifiers. It protects against corrosion, oil oxidation and sludge under all operating conditions.
HPR DIESEL 15 is designed for use in modern 4, 6 & 8+ cylinder multi cam, multi valve (Including VVT), naturally aspirated, supercharged, turbocharged common rail & direct injection diesel engines.
HPR DIESEL 15 exceeds the requirements of API CI-4 PLUS/SL and ACEA A3/B4/E7 as well as many manufacturers' requirements. It can be used where SAE 15W-40, SAE 20W-40, SAE 15W-50 or SAE 20W-50 grade oils were originally recommended by the manufacturer. It is suitable for use where JASO DH-1 and Global DLD-3 are requested in the owners handbook.
HPR DIESEL 15 is suitable for use in passenger cars, motorcycles, 4WD’s, light & heavy duty commercial engines in trucks, tractors, agricultural & earthmoving equipment as well as industrial equipment such as fork lifts & stationary engines. It is suitable for use with Diesel & Petrol/E10/LPG (Dual Fuel). It is also suitable for use in petrol and LPG engines as a mixed fleet oil and can be used in motorcycles with wet clutches.
HPR DIESEL 15 features the Penrite EXTRA TEN in the oil's SAE rating. This technology helps protect your engine by using a normal start up viscosity with an oil that has a higher operating temperature viscosity. This improves engine oil film strength, lowering frictional heat whilst providing an extra layer of anti wear protection over standard SAE grade oils, reducing engine wear in all driving conditions.
NOTE: when changing oil, Penrite recommend using Penrite Engine Flush, a fast acting, solvent free, engine cleaning formulation that removes engine deposits, sludge and contaminants with the oil service drain. It contains added zinc for engine wear protection and its fast acting formulation works in 10 minutes.
For product safety and handling information, refer to Safety Data Sheet (SDS SHEET) below
|Density at 15°C, kg/L||0.872|
|Viscosity, Kinematic, cSt at 40°C||166|
|Viscosity, Kinematic, cSt at 100°C||19.7|
|Cold Cranking Viscosity, cP at -20°C||5809|
|Zinc, Mass %||0.122|
|Phosphorus, Mass %||0.110|
|Sulphated Ash, mass %||1.34|