Vantage 5W-30 is a high quality premium mineral, SAE 5W-30, friction modified engine oil made from pure hydrocracked base oils and the latest technology, anti-wear additive system that provides advanced engine protection, less sludge formation and excellent fuel economy.
Licensed by the API (American Petroleum Institute) to meet SN Resource Conserving and ILSAC GF-5 specifications ensuring quality and satisfaction.
Vantage 5W-30 is designed for use in modern 4, 6 & 8+ cylinder multi-cam, multi-valve (including VVT), naturally aspirated, supercharged & turbocharged engines. It is a full premium mineral product, and therefore is suitable for use in ROTARY engined vehicles such as Mazda RX series vehicles that require this viscosity grade.
Vantage 5W-30 is designed for vehicles that require engine oils meeting the fuel economy ILSAC GF-5 standard. It meets the latest API SN specification providing increased wear protection, better resistance to sludge formation and lower piston deposits than previous and lower grade oils. It can also be used where previous API specifications SM (2004-10), SL (2001-04), SJ were recommended and where the earlier ILSAC GF-3 or GF-4 specifications were required.
Vantage 5W-30 is designed for use in passenger car, 4WD's and light commercial petrol driven vehicles where the use of SAE 5W-30 engine oil is specified in the owner' handbook. It is suitable for use in modern petrol, LPG and Hybrid vehicles including those running on Ethanol fuel blends. It is suitable for everyday road use in "Flex Fuel" systems where E85 or E10 fuels are used. It is not suitable for use in diesel engined vehicles and is not recommended for use in four stroke motorcycles with wet clutches.
NOTE: when changing oil, Penrite recommend using Penrite Engine Flush, a fast acting, solvent free, engine cleaning formulation that removes engine deposits, sludge and contaminants with the oil service drain. It contains added zinc for engine wear protection and its fast acting formulation works in 10 minutes.
For product safety and handling information, refer to Safety Data Sheet (SDS SHEET) below
|Density at 15°C, kg/L||0.856|
|Viscosity, Kinematic, cSt at 40°C||67|
|Viscosity, Kinematic, cSt at 100°C||11.2|
|Cold Cranking Viscosity, cP at -30°C||5827|
|Zinc, Mass %||0.085|
|Phosphorus, Mass %||0.077|
|Sulphated Ash, mass %||0.87|