DOT 3 BRAKE FLUID is a premium quality, non-silicone, non-mineral/petroleum based, fully synthetic brake fluid designed for use in a wide range of brake and clutch applications.
DOT 3 BRAKE FLUID is recommended for re-fill or top-up of brake and clutch systems in passenger cars, 4WD's, motorcycles, light and heavy duty commercial vehicles, mining, construction and agricultural equipment that require a non petroleum based DOT 3 brake & clutch hydraulic fluid.
DOT 3 BRAKE FLUID is suitable for use where the vehicle manufacturer specifies DOT 3 brake fluid.
DOT 3 BRAKE FLUID can be used for first fill or refilling a brake or clutch system. For best results, the system should always be flushed with Penrite Brake Fluid DOT 3 prior to first fill or before refilling the system.
DOT 3 BRAKE FLUID should be changed according to the manufacturers service specifications.
Brake Fluids are naturally hygroscopic and will absorb water from the air. This will lower the effectiveness of the product. After opening bottle, ensure cap is resealed tightly to avoid water contamination.
For product safety and handling information, refer to Safety Data Sheet (SDS SHEET) below
|Density at 20°C, kg/L||1.01 - 1.06|
|Viscosity, Kinematic, cSt at 40°C||1270|
|Viscosity, Kinematic, cSt at 100°C||2.23|
|Equilibrium Reflux Boiling Point (wet), (typical)||150°C (305°F)|
|Equilibrium Reflux Boiling Point (dry), (typical)||240°C (465°F)|
|pH||7.0 - 11.5|