ENVIRO PLUS 10W-40 (Full Synthetic)

Find product/stockist

Package Code Carton Qty
5L EPLUS10W40005 4
10L EPLUS10W40010 1
20L EPLUS10W40020 1
60L EPLUS10W40060 1
205L EPLUS10W40205 1

Base Oil:
  • Full Synthetic
  • Full Synthetic Low - Mid SAPS
Used in the following Fuel Types:
  • Petrol / E10
  • LPG / Dual Fuel
  • Diesel with DPF
  • Diesel
Viscosity:
  • 10W-40

Enviro+ 10W-40 Enviro+ 10W-40 is a highly advanced, full synthetic OEM Warranty Approved, extended drain/mixed fleet, ultra high performance diesel (UHPD) oil. It is formulated with the highest standard synthetic base oil and advanced additives to ensure protection against wear, corrosion, oil oxidation and sludge. Enviro Plus 10W-40 is Cummins CES 20081, Mack EO-O Premium Plus , Mercedes Benz 228.51, Renault RLD-3 and Volvo VDS-4 manufacturer approved and meets API CJ-4/SM and ACEA E4/E6/E9 specifications.

Additional Product Information:
Brochures
Application:

Enviro+ 10W-40 is primarily designed for use in modern four-stroke, low emission, naturally aspirated and turbocharged, light and heavy duty diesel engines including those with extended drain intervals of up to 100,000km in accordance with the OEM operating conditions.

Enviro+ 10W-40 meets the requirements of ACEA E4/E6/E9 and API CJ-4/SM and can be used where previous API specifications are recommended. It can be used where the manufacturer specifies either 10W-40 or 15W-40 viscosity oils. It is also suitable for use in older engines requiring high performance ACEA E4/E6 oils such as Mercedes Benz Actros.

Enviro+ 10W-40 is suitable for use in the latest Euro IV and Euro V emissions European diesel engines including those that use SCR (Selective Catalytic Reduction) emissions systems along with those fitted with or without DPFs (Diesel Particulate Filters). Also suitable for use in normal or cooled EGR (Exhaust Gas Recirculation) systems, and 2001-on emissions engines where API CI-4 or higher oils are required. (Some of these engines also use Penrite Penblue as a part of their emission control systems).

Enviro+ 10W-40 is manufacturer approved by Cummins, Mack, Mercedes Benz, Renault and Volvo. It is also suitable for many Mercedes Benz Light Commercial and passenger car diesel engines where MB 228.31 or 228.51 are specified in the handbook. It can also be used in other light commercial and passenger cars if a full synthetic diesel engine oil is required or specified by the manufacturer.

Enviro+ 10W-40 is suitable for passenger car, 4WD’s, light & heavy duty commercial vehicles, construction, mining and agricultural equipment It can be used as a mixed fleet lubricant in both diesel and petrol driven vehicles. It is NOT recommended for use in motorcycles.

Important Maintenance Information

For vehicles fitted with a Diesel Particulate filter we recommend the use of Penrite ENVIRO+DPF CLEANER to clean & prevent DPF blockages, maximise catalyst life and improve engine efficiency, power & fuel economy.

Product Benefits:
  • Maximises DPF life and engine performance
  • Suitable for SCR and EGR systems
  • Extended oil drains of up to 100,000km
  • Provides ideal wear, bore polish & deposit protection
  • Controls oil consumption
  • Suitable for use in mixed fleets

Approvals:
To view OEM Approval document click on link below.

Key Specifications:
  • API CJ-4/SM
  • ACEA E4/E6/E9
  • MB 228.31
  • MTU Type 3
  • MAN 3277CRT/3477/3575
  • Caterpillar ECF-3-a
Typical Data
Density at 15°C, kg/L 0.864
Viscosity, Kinematic, cSt
at 40°C
at 100°C

104
14.2
Viscosity Index 139
Cold Cranking Viscosity, cP at -25°C 6320
Zinc, Mass % 0.088
Phosphorus, Mass % 0.081
Sulphated Ash, Mass % 0.99
Base Number 12.2


For more product information and specifications refer to Product Information Sheet (INFO SHEET) below

INFO SHEET MSDS SHEET


Penrite recommend "The Right Oil for the Right Application".

To find the right engine oil, transmission, brake, steering, suspension fluid, grease or coolant for your vehicle, please visit the Penrite Lube Guide by clicking the below button.

Penrite Lube Guide