Enviro+ HD 5W-30 is a highly advanced, low viscosity, heavy duty, full synthetic, extended drain, ultra high performance diesel (UHPD) engine oil. It is formulated with the highest standard synthetic base oil and advanced additives to ensure protection against wear, corrosion, oil oxidation and sludge. Enviro+ HD 5W-30 meets Mercedes Benz, Renault, Volvo, Mack, MAN, Cummins and many other manufacturer specifications as well API CJ-4 and ACEA E4/E6/E7/E9 industry specifications.
Enviro+ HD 5W-30 is primarily designed for use in modern four-stroke, low emission, naturally aspirated and turbocharged, light and heavy duty diesel engines including those with extended drain intervals of up to 100,000km in accordance with the OEM operating conditions.
Enviro+ HD 5W-30 meets the requirements of ACEA E4/E6/E7/E9, and API CJ-4 and can be used where previous API specifications are recommended. It is designed for use in new engines requiring low viscosity, fuel efficient engine oils such as in latest model Mercedes Benz trucks.
Enviro+ HD 5W-30 is suitable for use in the latest Euro IV and Euro V emissions European diesel engines including those that use SCR (Selective Catalytic Reduction) emissions systems along with those fitted with or without DPFs (Diesel Particulate Filters). Also suitable for use in normal or cooled EGR (Exhaust Gas Recirculation) systems. Some of these engines also use Penrite Penblue as a part of their emission control systems.
Enviro+ HD 5W-30 meets many OEM specifications such as for Mercedes Benz, Renault, Volvo, Mack, MAN, Cummins for heavy duty engine use. It is also suitable for Mercedes Benz light commercial and passenger car diesel engines where MB 228.31 or 228.51 oils are specified in the handbook. It can also be used in other light commercial and passenger cars if a full synthetic, SAE 5W-30 diesel engine oil is required or specified by the manufacturer. Suitable for use in new construction, mining and agricultural equipment where a low viscosity diesel engine oil is required. It is NOT recommended for use in motorcycles.
NOTE: when changing oil, Penrite recommend using Penrite Engine Flush, a fast acting, solvent free, engine cleaning formulation that removes engine deposits, sludge and contaminants with the oil service drain. It contains added zinc for engine wear protection and its fast acting formulation works in 10 minutes.
For product safety and handling information, refer to Safety Data Sheet (SDS SHEET) below
|Density at 15°C, kg/L||0.864|
|Viscosity, Kinematic, cSt at 40°C||70.4|
|Viscosity, Kinematic, cSt at 100°C||12.2|
|Cold Cranking Viscosity, cP at -30°C||6571|
|Zinc, Mass %||0.088|
|Phosphorus, Mass %||0.081|
|Sulphated Ash, mass %||1.0|