HPR GAS 10 is a premium high performance, semi synthetic, SAE 10W-50, non-friction modified engine oil. It contains a DOUBLE LAYER of engine wear protection with FULL ZINC and Penrite's advanced EXTRA TEN technology. It contains a combination of high technology additives, including additives to prevent oil nitration and low shear viscosity modifiers. It protects against corrosion, oil oxidation and sludge under all operating conditions.
HPR GAS 10 is designed for use in modern 4, 6 & 8+ cylinder multi cam, multi valve (including VVT), naturally aspirated, supercharged, turbocharged, direct injection, Petrol/LPG/Duel fuel engines. It is particularly suited for use under high load conditions such as taxi service, towing or where ambient temperatures are high.
HPR GAS 10 exceeds the requirements of API CI-4/SL and ACEA A3/B3 as well as many manufacturers' requirements. It can be used where SAE 10W-40, SAE 10W-50 or 15W-40 grade oils were originally recommended by the manufacturer.
HPR GAS 10 can be used in passenger cars, 4WD's, light commercial vehicles, motorcycles and industrial equipment such as fork lifts and stationary engines. It is recommended for use in LPG/Petrol/Dual fuel & light duty diesel engines as well as in four stroke motorcycles including those with wet clutches.
HPR GAS 10 features the Penrite EXTRA TEN in the oil's SAE rating. This technology helps protect your engine by using a normal start up viscosity with an oil that has a higher operating temperature viscosity. This improves engine oil film strength, lowering frictional heat whilst providing an extra layer of anti wear protection over standard SAE grade oils, reducing engine wear in all driving conditions.
NOTE: when changing oil, Penrite recommend using Penrite Engine Flush, a fast acting, solvent free, engine cleaning formulation that removes engine deposits, sludge and contaminants with the oil service drain. It contains added zinc for engine wear protection and its fast acting formulation works in 10 minutes.
For product safety and handling information, refer to Safety Data Sheet (SDS SHEET) below
|Density at 15°C, kg/L||0.867|
|Viscosity, Kinematic, cSt at 40°C||133|
|Viscosity, Kinematic, cSt at 100°C||19.5|
|Cold Cranking Viscosity, cP at -25°C||5074|
|Zinc, Mass %||0.122|
|Phosphorus, Mass %||0.110|
|Sulphated Ash, mass %||1.2|