ENVIRO+ 0W-20 is a premium, full synthetic, SAE 0W-20 engine oil. It uses the latest advances in mid SAPS (Sulphated Ash, Phosphorus and Sulphur)* additive technology and features low volatility synthetic base oil that minimises oil loss as well as an enhanced corrosion protection package for ensuring compatibility with ethanol based fuels such as E85.
ENVIRO+ 0W-20 is Licensed by the API (American Petroleum Institute) to meet SN Resource Conserving and ILSAC GF-5 specifications ensuring quality and satisfaction.
ENVIRO+ 0W-20 is designed for use in modern 4, 6 & 8+ cylinder multi-cam, multi-valve (including VVT), naturally aspirated, supercharged & turbocharged petrol, low emission engines including Hybrids.
ENVIRO+ 0W-20 is suitable for use in a wide range of vehicles that require a fuel efficient API SM or SN, ILSAC GF-4 or GF-5 Resource Conserving Engine oil. It can be used where fuel economy oils are specified such as Toyota 86 GT, Subaru BRZ, Jeep KL Cherokee 2.4 Litre, Mazda CX-5 and Nissan Altima models. It can also be used in Ford vehicles that specify M2C945-A and M2C947-A and in Chrysler vehicles specifying MS-6395 0W-20 engine oil.
It can be used in vehicles manufactured by -
ENVIRO+ 0W-20 is suitable for use in passenger cars, 4WDs & light commercial vehicles. It can be used with Petrol, LPG (Dual Fuel & LPi Liquid Phase Injection), E10 as well as being a primary recommendation for everyday use in Flexi-fuel vehicles that can run on both unleaded petrol and E85 ethanol blend fuels. It is NOT recommended for use in diesel engined vehicles or in motorcycles with wet clutches. It can also be used in Hybrid petrol/electric vehicles requiring this viscosity grade and specification.
Important Information when changing oil
NOTE: when changing oil, Penrite recommend using Penrite Engine Flush, a fast acting, solvent free, engine cleaning formulation that removes engine deposits, sludge and contaminants with the oil service drain. It contains added zinc for engine wear protection and its fast acting formulation works in 10 minutes.
For product safety and handling information, refer to Safety Data Sheet (SDS SHEET) below
|Density at 15°C, kg/L||0.848|
|Viscosity, Kinematic, cSt at 40°C||43|
|Viscosity, Kinematic, cSt at 100°C||8.3|
|Cold Cranking Viscosity, cP at -35°C||5060|
|Zinc, Mass %||0.085|
|Phosphorus, Mass %||0.077|
|Sulphated Ash, mass %||0.87|