Semi Synthetic 10W-40 is a premium quality, semi synthetic, SAE 10W-40, friction modified engine oil. It is formulated using the latest engine oil technology and high performance additives including a FULL ZINC anti-wear package for complete engine protection.
Licensed by the API (American Petroleum Institute) to meet SN specifications ensuring quality and satisfaction. It also meets European ACEA A3/B4 specifications.
Semi Synthetic 10W-40 is designed for use in modern 4, 6 & 8+ cylinder, multi-cam, multi-valve (including VVT), naturally aspirated, supercharged & turbocharged engines. It is not recommended for Rotary engines.
Semi Synthetic 10W-40 is designed for modern petrol and light duty diesel engines where the use of SAE 10W-30 or 10W-40 oil is specified in the owner’s handbook. It meets the requirements of API SN/CF and the European Standards ACEA A3/B4, as well as many manufacturers’ specifications, providing increased wear protection, better resistance to sludge formation and lower piston deposits than previous and lower grade oils. It can also be used where previous API specifications SM (2004-10), SL (2001-04) and SJ were recommended.
Semi Synthetic 10W-40 is suitable for use in passenger cars, 4WDs & light commercial vehicles and is compatible with Petrol/LPG (Dual Fuel), E10, Diesel (without DPF) and most other conventional fuels. If using with E85 fuel, Penrite recommend more frequent oil change periods.
NOTE: when changing oil, Penrite recommend using Penrite Engine Flush, a fast acting, solvent free, engine cleaning formulation that removes engine deposits, sludge and contaminants with the oil service drain. It contains added zinc for engine wear protection and its fast acting formulation works in 10 minutes.
For product safety and handling information, refer to Safety Data Sheet (SDS SHEET) below
|Density at 15°C, kg/L||0.873|
|Viscosity, Kinematic, cSt at 40°C||94|
|Viscosity, Kinematic, cSt at 100°C||13.8|
|Cold Cranking Viscosity, cP at -25°C||6430|
|Zinc, Mass %||0.108|
|Phosphorus, Mass %||0.098|
|Sulphated Ash, mass %||1.21|
|pH: (10 gm/L @ 20°C)||13.8|