ENVIRO+ 5W-30 is a premium full synthetic, SAE 5W-30 Original Equipment Manufacturer (OEM), Fully Licensed and Warranty Approved engine oil. It is fully approved for warranty service for VAG (Volkswagen Automotive Group) vehicles such as Volkswagen / Audi / Skoda / Seat, using the latest advances in mid SAPS (Sulphated Ash, Phosphorus and Sulphur)* additive technology.
ENVIRO+ 5W-30 is designed for use in modern 4, 6 & 8+ cylinder multi-cam, multi-valve (including VVT), naturally aspirated, supercharged & turbocharged engines. It is suitable for use in direct injection (FSI/TSI) petrol and light duty diesel (TDI) engines including those fitted with/without DPFs (Diesel Particulate Filters).
ENVIRO+ 5W-30 is Approved under VW Standard 504 00 and VW Standard 507 00 and exceeds ACEA C3 specifications and is suitable for use in a wide range of vehicles. It can be used where ACEA C3 oils are specified. It can also be used for vehicle models prior to 2008 model year where fuel economy specifications ACEA A1/B1 and A5/B5 are required and where ACEA A3/B4 is specified as well as where ACEA C2 is required. It is also suitable for use where MB 229.31/229.51 and BMW Longlife-04 oils are required in vehicles such as Mercedes Benz, BMW, Porsche, Jeep, Chrysler & SsangYong.
ENVIRO+ 5W-30 is suitable for use in passenger cars, 4WDs & light commercial vehicles. It is not recommended for use in motorcycles. It can be used with Petrol, LPG, E10, diesel (With & Without DPFs) & other conventional fuels.
For vehicles fitted with a Diesel Particulate filter we recommend the use of Penrite ENVIRO+DPF CLEANER to clean & prevent DPF blockages, maximise catalyst life and improve engine efficiency, power & fuel economy.
NOTE: when changing oil, Penrite recommend using Penrite Engine Flush, a fast acting, solvent free, engine cleaning formulation that removes engine deposits, sludge and contaminants with the oil service drain. It contains added zinc for engine wear protection and its fast acting formulation works in 10 minutes.
* Low SAPS oils may sometimes be referred to as "Low Ash" oils
For product safety and handling information, refer to Safety Data Sheet (SDS SHEET) below
|Density at 15°C, kg/L||0.852|
|Viscosity, Kinematic, cSt at 40°C||68.3|
|Viscosity, Kinematic, cSt at 100°C||11.7|
|Cold Cranking Viscosity, cP at -30°C||5906|
|Ca content, Mass %||0.162|
|Zinc, Mass %||0.085|
|Phosphorus, Mass %||0.075|
|Sulphated Ash, mass %||0.70|