ENVIRO+ C3 is a premium full synthetic, SAE 5W-30 engine oil. It meets and exceeds many manufacturer specifications and is blended using the latest advances in mid SAPS (Sulphated ash, Phosphorus and Sulphur)* additive technology.
Enviro+ C3 meets and exceeds API SN, ACEA C2 and C3 specifications.
ENVIRO+ C3 is designed for use in modern 4, 6 & 8+ cylinder multi-cam, multi-valve (including VVT), naturally aspirated, supercharged & turbocharged low emission engines including those fitted with/without DPF’s (Diesel Particulate Filters).
ENVIRO+ C3 may be used where SAE 0W-30, SAE 5W-30 and SAE 10W-30 grade oils are specified by the manufacturer. It can be used where ACEA C2 or ACEA C3 oils are specified by the manufacturer and meets the fuel economy* requirements of a C2 oil whilst maintaining the wear protection of a C3 oil. It can also be used where API SN or API SM grade oils are required and also where fuel economy specifications ACEA A1/B1 (Obsolete), ACEA A5/B5 and ILSAC GF-5 are specified.
ENVIRO+ C3 is suitable for use where MB 229.31/229.51/229.52, BMW Longlife-04 or GMW 16177 oils are required in vehicles such as -
|SsangYong||Subaru||Toyota||and many other vehicles|
ENVIRO+ C3 can be used in passenger cars, 4WD’s & light duty commercial vehicles and is compatible with Petrol, LPG, E10, diesel, biodiesel and most other conventional fuels. It is not recommended for use in four stroke motorcycles with wet clutches.
For vehicles fitted with a Diesel Particulate filter we recommend the use of Penrite ENVIRO+DPF CLEANER to clean & prevent DPF blockages, maximise catalyst life and improve engine efficiency, power & fuel economy.
NOTE: when changing oil, Penrite recommend using Penrite Engine Flush, a fast acting, solvent free, engine cleaning formulation that removes engine deposits, sludge and contaminants with the oil service drain. It contains added zinc for engine wear protection and its fast acting formulation works in 10 minutes.
*Mid SAPS oils may sometimes be referred to as “Low Ash” oils
**2.6% vs reference oil in M111FE test
|Density at 15°C, kg/L||0.856|
|Viscosity, Kinematic, cSt at 40°C||71|
|Viscosity, Kinematic, cSt at 100°C||12.1|
|Cold Cranking Viscosity, cP at -30°C||5894|
|Zinc, Mass %||0.081|
|Phosphorus, Mass %||0.075|
|Sulphated Ash, mass %||0.78|