Enviro+ 10W-40 is a highly advanced, Full Synthetic OEM Warranty approved, extended drain/mixed fleet, ultra high performance diesel (UHPD) oil. It is formulated with the highest standard Synthetic base oil and advanced additives to ensure protection against wear, corrosion, oil oxidation and sludge.
Enviro+ 10W-40 is primarily designed for use in modern 4, 6 & 8 cylinder naturally aspirated and turbocharged four-stroke, Low Emission, light and heavy duty diesel engines including those fitted with/without Diesel Particulate Filters (DPFs).
It may be used where SAE 10W-40 or SAE 15W-40 grade oils are specified by the manufacturer. It can be used where ACEA E9, JASO DH-2 and API CJ-4 or where previous API Specifications CI-4/Plus, CI-4 or CH-4 are recommended. It is also suitable for use in older engines requiring high performance ACEA E4/E6 oils. Suitable for use in the latest Euro IV and Euro V emissions European diesel engines including those that use SCR (Selective Catalytic Reduction) emissions systems along with those fitted with or without DPFs (Diesel Particulate Filters). Also suitable for use in normal or cooled EGR (Exhaust Gas Recirculation) systems, and 2001-on emissions engines where API CI-4 or higher oils are required.
It is manufacturer approved by Mercedes Benz for use in Light Commercial and passenger car diesel engines where MB 228.31 or 228.51 are specified in the owners handbook. It is suitable for extended drain intervals with OEM operating conditions and can also be used in other light commercial and passenger vehicles if a Full Synthetic diesel engine oil is required or specified by the manufacturer.
Suitable for passenger car, 4WDs, light & heavy duty commercial vehicles, construction, mining and agricultural equipment. It can be used in both light and heavy duty diesel fuelled vehicles. It is NOT recommended for use in motorcycles.
NOTE: when changing oil, Penrite recommend using Penrite Engine Flush, a fast acting, solvent free, engine cleaning formulation that removes engine deposits, sludge and contaminants with the oil service drain. It contains added Zinc for engine wear protection and its fast acting formulation works in 10 minutes.
For vehicles fitted with a Diesel Particulate filter we recommend the use of Penrite ENVIRO+DPF CLEANER to Clean & prevent DPF blockages, maximise catalyst Life and improve engine efficiency, power & fuel economy.
|Density at 15°C, kg/L||0.864|
|Viscosity, Kinematic, cSt at 40°C||104|
|Viscosity, Kinematic, cSt at 100°C||14.2|
|Cold Cranking Viscosity, cP at -25°C||6320|
|Zinc, Mass %||0.088|
|Phosphorus, Mass %||0.081|
|Sulphated Ash, Mass %||0.99|
|Total Base Number (TBN)||12.2|