Enviro+ 5W-40 is a Premium Full Synthetic SAE 5W-40 Original Equipment Manufacturer (OEM), Fully Licensed and Warranty Approved engine oil. It is fully Licensed and approved for warranty service for particular GM / Holden (DexosTM 2) and Mercedes Benz. It uses the latest advances in Mid SAPS (Sulphated Ash, Phosphorus and Sulphur)* Additive technology.
It can be used where ACEA C3 and C2 is specified and where the fuel economy Specifications ACEA A1/B1 (Obsolete), A5/B5 and ILSAC GF-5 are specified. It is suitable for use in vehicles requiring ACEA A3/B4 made before the 2010 model year.
Enviro+ 5W-40 is suitable for use in a wide range of vehicles including petrol and light duty diesel engines including those with or without a Diesel Particulate Filter (DPF). As a GM Dexos 2TM approved product it is approved for warranty service for most current GM and Holden Diesel engined vehicles such as Colorado, Captiva & Cruze. It is approved for use by Mercedes Benz where MB 229.51 is required and can be used in Volkswagen vehicles where VW 502 00 / 505 00 / 505 01 is specified as well as in Porsche vehicles where Porsche A40 is needed. It is suitable for use where BMW Longlife-04 is required as well as for use in many other makes and models including -
Enviro+ 5W-40 is suitable for use in passenger cars, 4WDs & light commercial vehicles. It is not recommended for use in motorcycles. It can be used with Petrol / LPG / E10 & Diesel (with / without DPF) as well as other conventional fuels.
NOTE: when changing oil, Penrite recommend using Penrite Engine Flush, a fast acting, solvent free, engine cleaning formulation that removes engine deposits, sludge and contaminants with the oil service drain. It contains added Zinc for engine wear protection and its fast acting formulation works in 10 minutes.
For vehicles fitted with a Diesel Particulate Filter, we recommend the use of Penrite ENVIRO+DPF CLEANER to Clean & prevent DPF blockages, maximise catalyst Life and improve engine efficiency, power & fuel economy.
* Low SAPS oils may sometimes be referred to as "Low Ash" oils
|Density at 15°C, kg/L||0.850|
|Viscosity, Kinematic, cSt at 40°C||81|
|Viscosity, Kinematic, cSt at 100°C||13.4|
|Cold Cranking Viscosity, cP at -30°C||5620|
|Zinc, Mass %||0.089|
|Phosphorus, Mass %||0.080|
|Sulphated Ash, Mass %||0.80|
|Total Base Number (TBN)||8.0|