HPR 0 is a Premium, Full Synthetic SAE 0W-30 engine oil. It features a DOUBLE LAYER of engine wear protection with Full Zinc and Penrite’s advanced Extra Ten technology. It uses a combination of the latest Additive technology and a low shear rate viscosity modifier, to ensure additional protection against wear, corrosion, oxidation, piston deposits and sludge under tough conditions.
HPR 0 is designed for use in modern 4, 6 & 8+ cylinder multi-cam, multi-valve (including VVT), naturally aspirated, supercharged & turbocharged engines, including petrol/electric hybrids. It is not suitable for use in Rotary engines.
HPR 0 can be used where the ILSAC GF-3/GF-4/GF-5, ACEA A1/B1 (obsolete) and A5/B5 fuel economy Specifications are requested by the manufacturer. It is also suitable for use in many Diesel and LPG powered vehicles requiring an engine oil meeting ACEA B5 Specifications.
HPR 0 is suitable in petrol/electric powered hybrids where this viscosity and Specification are requested by the manufacturer. It is NOT recommended for use in diesels fitted with a DPF (Diesel Particulate Filter) that require an ACEA “C” grade Low-Mid SAPS (Sulphated Ash, Phosphorus & Sulphur) engine oil.
HPR 0 is suitable for use in passenger cars, 4WD’s & light commercial vehicles and is compatible with Unleaded Petrol/LPG (Dual Fuel)/E10 & Diesel and other conventional fuels. It is not suitable for use in Four Stroke motorcycles.
HPR 0 features the Penrite EXTRA TEN in the oil's SAE rating. This technology helps protect your engine by using a normal start up viscosity with an oil that has a higher operating temperature viscosity. This improves engine oil film strength, lowering frictional heat whilst providing an EXTRA LAYER of Anti Wear protection over standard SAE grade oils, reducing engine wear in all Driving Conditions.
NOTE: when changing oil, Penrite recommend using Penrite Engine Flush, a fast acting, solvent free, engine cleaning formulation that removes engine deposits, sludge and contaminants with the oil service drain. It contains added Zinc for engine wear protection and its fast acting formulation works in 10 minutes.
|Density at 15°C, kg/L||0.844|
|Viscosity, Kinematic, cSt at 40°C||56|
|Viscosity, Kinematic, cSt at 100°C||10.3|
|Cold Cranking Viscosity, cP at -35°C||5894|
|Ca content, Mass %||0.269|
|Zinc, Mass %||0.105|
|Phosphorus, Mass %||0.096|
|Sulphated Ash, Mass %||1.09|
|Total Base Number (TBN)||10.1|