Stops oil burning 30-70 is designed for use in 4, 6 & 8+ cylinder naturally aspirated, supercharged & turbocharged engines. It is not recommended for multi-cam, multi-valve or engines with variable valve timing.
Stops oil burning 30-70 is designed for older petrol engines where there is excessive Oil Consumption due to conditions such as worn piston and oil rings, cylinder bore deformation, worn or broken valve stem seals, worn main seals and other gasket and oil sealing issues. The heavier viscosity cold starting temperature and ultra high operating viscosity of this oil makes this product resilient to conditions where normal oils would be burnt or leaked by some engines, therefore prolonging the service Life of some motors.
Stops oil burning 30-70 is designed for use in petrol driven passenger car, 4WD's and light commercial vehicles and is compatible with Petrol/LPG (Dual Fuel) & E10. It is not recommended for diesel engines
NOTE: when changing oil, Penrite recommend using Penrite Engine Flush, a fast acting, solvent free, engine cleaning formulation that removes engine deposits, sludge and contaminants with the oil service drain. It contains added Zinc for engine wear protection and its fast acting formulation works in 10 minutes.
|Density at 15°C, kg/L||0.876|
|Viscosity, Kinematic, cSt at 40°C||290|
|Viscosity, Kinematic, cSt at 100°C||28.6|
|Zinc, Mass %||0.110|
|Sulphated Ash, Mass %||0.88|
|Total Base Number (TBN)||5.8|
No reviews for this Product yet.